Heatscope Pure 3kW Electric Outdoor Infrared Heater

Modern PURE 2.4kW - 3kW Ceramic Wall or Ceiling Mounted Outdoor Electric Infrared Heater by Heatscope

The Heatscope PURE outdoor infrared heater is a convenient, energy-efficient, and space-saving electric ceramic heater with a discrete and unique design that can be recessed into the ceiling or wall-mounted.

The PURE electric infrared heater by Heatscope can be used for both indoor and outdoor heating. This eco-friendly radiant heater is an ideal heating solution for homes,  restaurants, cafes, on terraces or in marquees with its barely perceivable light output and maximum heat, it is both effective and unobtrusive – Perfect as a patio heater or for bathrooms, conservatories and greenhouses.

Choose between 2400 W or 3000 W power in either a Black or White finish. The Heatscope PURE radiant outdoor heater provides a soft low glow that doesn’t affect or change the lighting of a room and it also directly transfers heat to solid objects, so people can absorb pleasant maximum heat comfortably. Heat won’t simply “blow away” in windy or drafty conditions.

The Heatscope PURE electric outdoor infrared heater gives off instant heat at the flick of a switch reaching maximum output in 20 seconds!

These outdoor infrared heaters can be installed in 3 different configurations:

Manual - The heater will be hardwired to your fuse box. To turn the appliance On or Off you will need to install an isolation switch. (2 gang switch not included)

Key points:

1. This will allow you to control the heater via a permanent wall switch
2. Each Heatscope unit will need it’s own Dual Isolation Switch; you cannot control multiple units from the same switch
3. There will be no WiFi signal or smart device access with this type of installation

Dual WiFi Smart Switch (wireless mode) - The Heatscope Heater will be hardwired to a ZigBee Dual WiFi Smart Switch, and this unit will be in line with your fuse box allowing the appliance to receive commands via a smart device (smartphone, tablet etc).

Key points:

1.  The Dual WiFi Smart Switch will connect the Heatscope heater to your WiFi network via the eWelink App. This will allow you to control the heater via a smart device (smartphone, tablet etc).
2. Each smart device will need the eWelink App installed to be able to control the heater
3. By adding the ZigBee Bridge, it will allow you to include additional accessories such as the Wireless Switch (Remote Control) and/or a Motion Sensor to control your
   

SmartBox - Mount this SmartBox control unit between power supply and your heater. Switch ON and OFF, and regulate power level with the included IR Remote.

Key points:

1. Automatic shutdown after 4, 6 or 8 hours - deactivation possible.
2. Install it horizontally or vertically with the heater or just beneath it.
3. Innovative design with IR remote included

Features

• Weather-Resistant

The PURE electric patio heater can withstand general all-weather conditions so no protective shield or any additional protection is required. All models are certified with an IP rating for protection against dust, splash-water, and wind.

• Easy Installation

Dedicated wall & ceiling mounts (which only need two screws to be securely attached), enable subtle placement anywhere.

• Adjustable

Easily and accurately change the angle via the swivel joint mount for precise heating.

• Easy to use

Single ON/OFF switch, plus two adjustable output levels. Can also be integrated with Smart Home Systems – perfect for the connected home.

• Eco-Friendly

The PURE oudoor heater converts over 90% of input energy directly into radiant heat and operates at a smarter cost per hour. No greenhouse gases or unpleasant odours are emitted, and they don’t require ventilation or a flue.

Accessories Included

Bracket for wall or ceiling mounting

Weight & Dimensions

• Weight: 7.5kg [16.53lb]
• Model dimensions mm [in]: L 1042 [41]W 166 [6.5]H 87 [3.4]

Specifications

• Installation height: 2.1-2.7 m
• Power / Current: 2400 W / 10.43 A OR 3000W / 13.5 A
• Voltage: 220-240 V AC ~ 50/60 Hz
• Surface temp: 400 °C
• Body temp: Max. 130 °C
• Visible light:  < 300-400 Lumen
• Application Indoor & Outdoor
• Materials:  Aluminum body, glass-ceramic front

HEATSCOPE® infrared heaters must be installed and executed only by an authorised expert / professional electrician.