Heatscope Vision Mounted 3.2kW Outdoor Patio Infrared Heater

Modern VISION 3.2kW Wall or Ceiling Mounted Ceramic Electric Outdoor Infrared Heater by Heatscope

VISION by Heatscope is a convenient, energy-efficient and space-saving radiant heater (also known as an infrared heater) with a discrete and unique design that is suitable for both indoor and outdoor heating. This eco-friendly, wall or ceiling-mounted outdoor radiant heater emits medium-wave infrared light with its parallel carbon heating strands, creating a cosy atmosphere without light output.  - Perfect for outdoor events and terraces as well as bathrooms and spas.

Available in Black / White, the Heatscope VISION electric outdoor infrared heater is an ideal heating solution with its barely perceivable orange-coloured ambient light output and maximum heat, it is both effective and unobtrusive.
The VISION radiant panels cover the largest heatable area and directly transfer heat to solid objects, so people can absorb pleasant maximum heat comfortably. With this electric infrared outdoor heater, heat won’t simply “blow away” in windy or drafty conditions.
The VISION radiant heater gives off instant heat at the flick of a switch reaching maximum output in 30 seconds!

These VISION radiant outdoor heaters can be installed in 3 different configurations:

Manual - The heater will be hardwired to your fuse box. To turn the appliance On or Off you will need to install an isolation switch. (2 gang switch not included)

Key points:

1. This will allow you to control the heater via a permanent wall switch
2. Each Heatscope unit will need it’s own Dual Isolation Switch; you cannot control multiple units from the same switch
3. There will be no WiFi signal or smart device access with this type of installation

IR Remote control (wireless mode) - Control Heatscope heaters with the infrared Remote Control. Switch on and off, and change power levels of your heaters. The Heatscope Heater will be hardwired to a ZigBee Dual WiFi Smart Switch, and this unit will be in line with your fuse box. 

Key points:

1. Connect the heater to your WiFi network via the eWelink app
2. On & Off Scheduling via eWelink app
3. Control the heater output: 0%, 50% and 100%
4. Control the heater using voice assistants
5. This switch is 2.4GHz wifi compatible only
6. Operate multiple heaters (1 smart WiFi switch per heater)

Dual WiFi Smart Switch (wireless mode) -  It is installed inline between the fuse box and the Heatscope heater, and it allows the appliance to receive commands via a smartphone. The Heatscope Heater will be hardwired to a ZigBee Dual WiFi Smart Switch, and this unit will be in line with your fuse box. 

Key points:

1. The Dual WiFi Smart Switch will connect the Heatscope heater to your WiFi network via the eWelink App. This will allow you to control the heater via a smart device (smartphone, tablet etc).
2. Each smart device will need the eWelink App installed to be able to control the heater
3. By adding the ZigBee Bridge, it will allow you to include additional accessories such as the Wireless Switch (Remote Control) and/or a Motion Sensor to control your Heatscope Heater
4. The Wireless Switch is a freestanding unit that is very easy to operate
5. The Motion Sensor will detect motion immediately and if no motion is detected for 150 seconds after becoming “active” it will send a “no motion detected” signal

Features

• Weather-Resistant

The VISION electric outdoor heater can withstand general all-weather conditions so no protective shield or any additional protection is required. All models are certified with an IP rating for protection against dust, splash-water, and wind.

• Easy Installation

Dedicated wall & ceiling mounts (which only need two screws to be securely attached) enable subtle placement anywhere.

• Adjustable

Easily and accurately change the angle via the swivel joint mount for precise heating.

• Easy to use

Single ON/OFF switch, plus two adjustable output levels. Can also be integrated with Smart Home Systems – perfect for the connected home.

• Eco-Friendly

VISION converts over 90% of input energy directly into radiant heat and operates at a smarter cost per hour. No greenhouse gases or unpleasant odours are emitted, and they don’t require ventilation or a flue.

Accessories included

Mounting parts

Weight & Dimensions

• Weight: 10kg [22.05lb]
• Model dimensions mm [in]: L 1660 [65.4] W 184 [7.2] [6.5] H 87 [3.4]

Specifications

• Heat output: 3200W / 13.91 A
• Installation height: 2.1-2.7 m
• Power / Current: 3200 W / 13.91 A
• Voltage: 220-240 V AC ~ 50/60 Hz
• Surface temp: 300 °C
• Body temp: Max. 130 °C
• Visible light:  < 300 Lumen
• Application Indoor & Outdoor
• Materials:  Aluminum body, glass-ceramic front

HEATSCOPE® infrared heaters must be installed and executed only by an authorised expert / professional electrician.